There’s is nothing worse than picking up some weed and nothing to roll it in. There are tons of alternatives to smoke your weed in, but nothing gets potheads higher than water bottle bongs! A full breath of pure concentrated THC no joint can measure up with!
Whether you use a plastic bottle, or fruit lying around, anything can be transformed into your own homemade bong! Although many know the homemade water bottle bong by heart, there are even more creative ways to get your smoke on. Some other innovative options, excluding the plastic bottle bong hits, include the gravity bong, the mason jar bong, Pringles can, liquor bottle bong, and the tic-tac bong!
Here’s a detailed analysis of how to make a homemade bong even the biggest stoners would be envious of!
Tips for Making a Homemade Bong
Besides sparking up your creativity, making a homemade bong can bring you many pleasant and funny memories to look back on. A stoner will find a way to get high, one way or the other and no apple bong will be the end of it. Whichever way it is, making a bong from an empty plastic bottle is proved to be dangerous, even cancerous to your lungs.
Smoking from aluminum foil is another dangerous method you should avoid, not to mention it’s practiced to consume other drugs as well. You can get higher than expected from leftovers of things you didn’t anticipate.
Homemade bongs should be sanitary, as well as safe for your consumption regardless of how much you desperately need to get high. Your lungs will thank you for it. If you insist on smoking from a water bottle bong make sure you find a nice and clean plastic bottle.
Homemade bongs are an affordable alternative to purchasing a new one. Luckily, every doper has food lying around and they can learn how to make a homemade bong from basic, home applies. With the right tools, patience, and steady hands, every cannabis smoker can become an inventor.
In the following, you’ll learn how to make a homemade bong, which homemade weed bong alternatives get you the highest, what requires a few holes, and the smoking equipment you need to make the perfect makeshift bong.
How to Make a Homemade Gravity Bong?
For the first sensational method, you’ll need a bottle, some water, aluminum foil, a knife, scissors, a plastic container, and of course some weed. To perfect this DIY bong you’ll need to cover the mouthpiece of the plastic bottle with foil. What’s crucial here is to try and make an aluminum bowl in the mouthpiece hole of your bottle bong.
Try using a larger bottle instead of a smaller soda bottle. That way you get enough smoke and make the most out of the DIY bongs since gravity is on your side. This bong needs to also be a smaller bottle, so it can fit in another plastic container. What you’ll need to do next is poke tiny holes into the foil so that more smoke is gathered inside the bottle.
You can use a metal screw, or any kind of sharp object to puncture small holes, just make sure you don’t create huge gaps, pushing the bowl piece deeper inside.
Cut the water bottle in half, at least 1-2 inches. You’ll need that lower hole to add water, which are the finishing touches of assembling a gravity bong. Locate a plastic container, similar to a bucket or bin that is larger than your own bong, and fill the water.
Fill up your water bottle bong, stack some weed in the foil bowl, and light up. The cut bottle should be placed above the water in the bucket. Wait till the smoke rises, remove the foil and inhale deeply. Don’t put the water bottle bong back on top of the water, unless you want your smoke to escape. The gravity bong balances the smoke inside thanks to gravity.
How to Make a Mason Jar Bong?
To create this homemade bong, you’ll need a mason jar, or any type of jar, a top lid, and a sharp object to poke small holes onto. You need to poke exactly three holes, including one for the weed and another for the mouthpiece.
Stoners claim that the best way to inhale so much smoke is from a DIY bong made of a mason jar. It’s one homemade bong built to last. Once you’ve poked the second hole onto the lid, it’s time to make a small hole for the carb hole.
Next, you’ll need a few tubes, which you can easily locate within your household items. Place them inside the jar through the larger hole slightly leaning forward. Each tube needs to be long for a deep inhale, but short enough not to contact the water on the bottom.
To make your homemade bong one for the books, use ice water and screw the metal screw on. The metal screw-on top needs to have a filler for the weed and a straw-like construction for you to consume cannabis Load the best weed you got into the bowl and light up.
How to Make a Tic-Tac Bong?
Imagine you’re at a friend’s house and you have no water bottle bong, pipes, or paper to smoke your weed in when suddenly you notice a pack of tic-tac on the table. Tic-tac comes in handy for smoking weed just as they do for bad breath.
Be advised that one of the least healthy ways to create a homemade bong is through a tic-tac, as anything involving burning plastic can damage your lungs. So you need to be very careful when using this method.
What you’ll need to make a homemade bong with a tic-tac box is a pair of scissors or a metal pen tip and use the pointed end to screw a tiny hole close to the bottom. There you’ll put your straw or tube. You’ll also need to place a cone made of aluminum foil on the opposite side. If you don’t have anything to inhale enough smoke with you can try opening the pen shaft and use the ink tube for suction.
Put weed inside your cone, light up, and take a deep breath from the upper opening!
How to Make a Bong Out of a Pringles Can?
Although Pringles does not support using their cans as a makeshift bong, their hollow tube makes it the perfect choice for a homemade bong. Once you’ve finished with all the tasty chips inside, the can, along with some other equipment can become the best DIY bong you’ve ever seen!
You’ll also need an empty pen pipe, some foil, a knife or another sharp object, duct tape, and a lighter. Besides the large rounded hole you see on top of every Pringles can, the smoker needs to make another smaller hole at the bottom of the can. The next thing you need is a pen’s shaft to use as a makeshift stem and secure it with duct tape.
This might get you the best-looking bong, however, it’s not the healthiest alternative.
An old stem and bowl from a broken bong can come in handy for optimal airflow. The bowl piece is for your weed, and if you don’t have it you can make it from aluminum. Once you have your weed neatly tucked into the bowl you can light up and inhale from the top opening of the Pringles can. In order not to get much smoke from the hole large enough for a dragon, poke a hole or two on top of the can covered with foil!
How to Make a Liquor Bottle Bong?
If there are no water bottles lying around among your household items, try using a good old liquor bottle. Make sure the bottle resembles a bong, meaning it should be wide with a narrow neck. FYI do not forget to remove any trace of alcohol in the bottle before the drilling process.
A glass bottle might be the most effective way to use a homemade bong, as bongs are naturally glass-made.
You’ll also need a glass drill, which you can find in your dad’s garage or the local hardware store. Make sure the drill’s on the smaller side as the hole needs to be solely used for the bowl stem. Duct tape is your friend in these manners, so sticking a small strip where you plan to drill will provide traction and hold the bit in place.
Following, you’ll need to find a stem, which can include a bowl, or you can make one on your own. Once you place your stem in the drilled hole seal with clear silicone or super-glue. This will improve suction in the future.
Once you’ve let the glue settle you can add water to the bottom, past the stem. Add some of the devil’s lettuce into the bowl, light up and inhale from the tip of the liquor bottle!
How to Make a Water Pipe Bong?
Last but not least, the ultimate homemade bong is the water bottle bong. The homemade apple bong can remain just a healthy snack, while a water bottle’s uses are unlimited. Any size of water bottle is suitable, but if you want a larger fill you should use a larger bottle.
Another thing you’ll need is a lighter, some tin foil, a toothpick or metal screw, and a pen pipe. You puncture the side of a bottle for a shaft and bowl, and you put foil into the mouthpiece. You make small holes into the foil for inhalation, use a toothpick if you have a smaller bottle.
Add weed into the bowl, light up, and suck in for dear life!
How to Make a Homemade Bong: Bottom Line
Although it’s the easiest method to master, smoking out of anything plastic can be extremely dangerous. To get the most out of your bong hits use glass-material objects with wide interiors. Water is your life force, so don’t forget to add water.
Drilling into a liquor bottle might seem like a waste of time if you don’t do it right, the time amount required is enough for you to drive to the drugstore and pick up some papers yourself.
Whichever method for a homemade bong you choose, it should be the healthiest for you. If you’re just looking to pass the night with a toke or two, the plastic bottle might save you all the trouble until you can get the proper tools for the perfect smoking session!