How to Make a Homemade Dab Rig?

How to Make a Homemade Dab Rig

Greetings CBD flower fanatics! Have you ever thought about getting high without needing to roll a joint? We're here to show you some additional ways to get the finest high you've ever had!

We understand that the ground weed bore you at times - the good news is that marijuana can be consumed in a variety of ways! Whether it's through a vape pen, or more creative options like light bulbs, hot knives - the options are endless.

If you're interested in learning more about this new trend in smoke culture, the dab rig is the ideal solution for smokers who enjoy "savoring the flavor." If you don't have a dab rig, you will learn how to make a homemade dab rig with this article.

The dab rig is very similar to a classic bong and is ideal for consuming oil, rosin, hash, and other similar refined cannabis substances. The dab rig also called a banger comes in many forms with the most popular ones being made of heat-resistant borosilicate glass. If you're feeling fancy, you can even get yourself a quartz banger.

We're not only here to present to you this lovely device, but we'll also show you how to make it yourself a homemade dabber!

Regardless if you want to learn how to make your own oil rig on a budget, or just feel like indulging in a DIY dab rig project, you've come to the right place. So, devoted smokers, keep reading to find out what a dab rig is, what it can do for you, and how to create one yourself.

How to Make a Homemade Dab Rig
Photo Credit: Weed Maps

What is a Dab Rig?

A dab rig is a special type of water pipe designed for dabbing. It is a device for vaporizing rosin, oils, hash, or shatter - this is in sharp contrast to the combustion that occurs when smoking a joint. They're primarily constructed of glass, however, there is a variety of hardware options.

Dab rigs are becoming increasingly popular! This is partly due to the surge in popularity of cannabis concentrates in recent years. We're no longer only rolling joints, smoking pipes, and ripping bongs - we're consuming highly refined cannabis products that give our favorite flavors a whole new meaning!

Using a dab rig has a lot of advantages! You may smoke with confidence knowing that your dab rig is producing maximum, delicious power, regardless of which dab rig you choose. When you keep your dab rig at a consistent, controlled temperature, you'll get a hit that is rich in flavor.

Another important benefit is that you will never have to deal with harsh smoke when you use a dab rig! You must, however, control the temperature so that your throat doesn't burn. In addition, we're willing to wager that you won't cough as much as you probably do from a joint!

Essentially, even the most ardent dabbers, agree that a decent hit from this device delivers more flavor than a traditional rolled join! So put your rolling papers away and grab yourself a dab rig!

Tips for Making a Homemade Dab Rig

Before we get started on how to make your own dab rig, there are a few things you should keep in mind!

Nothing will ever compare to the original K.Haring Dab Rig or Piece Maker's Kube Silicone Dab Rig, but we'll show you how to create the greatest one possible - it'll be effective and won't interfere with the high!

The process isn't difficult, but it can be challenging if you don't have all of the necessary components for your DIY dab rigs - so make sure you have everything listed below:

  1. Waterpipe or Bong - This part doesn't have to be fancy as long as it functions properly. The most important aspect is that it is the correct size so it works efficiently.
  2. Dab Nail or Banger - It is located at the end part and is responsible for vaporizing the concentrate. A banger is similar to a bowl and the nail is usually thin and long.
  3. Dab tool - It's a must-have and you won't be able to dab without it. Its purpose is to help you load and control your concentration.
  4. Torch - Before you do anything else, make sure you have a torch. It allows dabbing to be done in a variety of locations.
  5. Timer - It's a must-have tool for keeping track of when the banger will cool down - a regular stopwatch on your phone will suffice.

Of course, depending on the dab rig you want to make, these items might not be sufficient, but they are the bare minimum. In addition, we show you how to create your own dab rig.

How to Make a Homemade Dab Rig
Photo Credit: Weed Maps

How to Make a Homemade Dab Rig Out of a Plastic Water Bottle and Hot Knife?

One of the simplest ways to build a DIY dab rig is to use a water bottle and knife. You may experience smooth, clean vapor in no time with these items that we all have at home.

Materials needed

You'll need the following materials to get started making this homemade dab rig:

  • Metal knife
  • Plastic bottle
  • Stovetop or torch
  • Paper clip

Steps to Make a Homemade Dab Rig Out of a Plastic Bottle

After you've gathered all of the supplies listed above, you can proceed with the instructions below:

  1. Prepare the plastic bottle -You will only need the top half of the bottle so remove the bottle cap and cut it in half.
  2. Cut the bottle -On the bottom of the top half cut a square hole just large enough for your butter knife to fit through.
  3. Heat your butter knife -Using a cooking burner or a torch, heat your butter knife
  4. Dab -Whenever you are ready to dab, insert the hot knife in the square hole you've cut in step 2.
  5. Apply concentrate -Now it's time to use the paper clip. Apply a small amount of concentrate to your knife using the paper clip.
  6. Inhale -Inhale the vapor by placing your lips on the top of the plastic bottle.

How to Make a Homemade Dab Rig Out of an Old Bong?

If you wonder how to make a homemade dab rig out of your old bong, we will show you in a few simple steps. You can turn an old bong into a dab rig just with two easy components if you have one laying around.

Materials needed

You will just need the following two items to construct this homemade dab rig:

  • Adapter
  • Dab rig nail

Step One: Find a male adapter

Finding a bong adapter is your first step. This is a little device that changes the joint size and gender of your bong.

Step Two: Check the adapter's joint size

The next thing to do is to check your adapter's joint size - it is most often 14mm or 18mm in diameter.

The breadth of your pinkie is an easy technique to determine your joint size- it's most certainly 18mm if the joint is wider than the breadth of your pinkie.

Step Three: Find a dab nail

Find quartz, ceramic, or a titanium nail - this is the final component needed to turn your bong into a homemade dab setup.

Step Four: Check the nail size

Make sure your nail size is the same as your adapter - an 18mm adapter necessitates the use of an 18mm nail.

How to Make a Mason Jar Dab Rig?

Making dab rigs out of a jar is our final and perhaps more interesting method! You undoubtedly have one at home, and if you don't, it's not expensive to get one -we guarantee it'll be cool!

How to Make a Homemade Dab Rig
Photo Credit: Pinterest

Materials needed

  • Torch
  • Plastic pen
  • Mason Jar with a lid
  • Aluminum foil
  • Titanium nail
  • Bendy straw

Steps for a DIY Mason Jar Dab Rig

  1. Drill your jar lid- Drill two holes in the lid of your glass jar and make sure they're equal in size.
  2. Wrap the pen- The following step is to wrap the pen with aluminum foil and place it in one of the two holes you drilled before.
  3. Put your titanium nail in the pen- Insert your titanium nail in the pen and use aluminum foil to bind it to the lid
  4. Place your bendy straw- Insert your bendy straw into the other hole you drilled and wrap it tightly in aluminum foil.
  5. You're all set- Fill your mason jar halfway with water and dab away!

Now You Can Dab Anywhere

Dab rigs are an excellent choice for most concentrate enthusiasts - they can dab their favorite concentrate from their favorite plant!

Although nothing can completely replace a high-quality dab rig, homemade dab rigs are a terrific way to save money while still getting the most out of your extracts.

As we mentioned before, making homemade rigs is easier than you think - the majority of the tools you'll need can be found in your own home! However, it depends on the type of dab rig you want to construct.

Whichever one you decide to make, always make sure you are you're using high-quality equipment, and always remember to have fun responsibly!

Remember to tell Alexa to have your dab rig prepared before you arrive home! Enjoy!